Outer Limits 4x4 Board

just wanted to know if one one has put ifs hubs on the front stub axles of there solid front end. i have heard that you can do this and gain one inch extra wheel track each side?

Yep this is true and you gain about 30mm per side tho you will need spacers to space the disc back to the original position and ive only seen one supplyer and thats marks adaptors and they aint cheap lookie here
http://www.marks4wd.com/products/Axle%2 ... dening.htm

LOCKTUP does them and also BUBS CUSTOMS

thanks for the info guys might try to machine up some at work on the lathe