Page 1 of 1
dash light tap in ?
Posted: Sun Aug 23, 2009 3:57 pm
by GUTROLL
hi, can any one tell me what wire i can use for external guages in a 2006 gu patrol & also a 2008. thanks.
Posted: Sun Aug 23, 2009 4:44 pm
by NutterGQ
sure...try a copper one.
Posted: Sun Aug 23, 2009 9:43 pm
by IN24BZ
never really specified what kind of engine was in it and what feed for the guage you were looking for..
Posted: Mon Aug 24, 2009 5:24 am
by Skegbudley
I took mine from the cig lighter light.
wire for guages
Posted: Mon Aug 24, 2009 9:26 pm
by 265grunter
off the top of my head i guess you mean the lighting in the guages?going on the responses you got i know what you must be thinking.you have to wait for the knobs to have their say first before you get a decent reply.will pm.
Re: wire for guages
Posted: Mon Aug 24, 2009 10:59 pm
by T_Diesel
265grunter wrote:off the top of my head i guess you mean the lighting in the guages?going on the responses you got i know what you must be thinking.you have to wait for the knobs to have their say first before you get a decent reply.will pm.
HTFU precious..... It was a pretty vague question.
You can take your power from anywhere you have a 12 volt source. Depends on if you want them permanently lit up from your accessories or only when you put your lights on?
Just hunt about with your multimeter and find a suitable point that is close to where you are mounting them.