Outer Limits 4x4 Board

Posted: **Mon Aug 24, 2009 5:23 pm**

really would like to get rid of the drums on the back of my 60's and convert to disc brake.

is it possible to bolt on the rear setup of an 75 or 80 series disc brake setup to my diff housing?

is there any thing else out there?

ive tryed a search but havnt got any helpful info, granted ive only got limited time on the net to search as ive only got the net at work.

any help or info would be great.

cheers, dan

Posted: **Tue Aug 25, 2009 3:56 pm**

There is a thread or two on it here.

There is a few threads on ih8mud.com.

Search the Snake racing website.

Posted: **Wed Aug 26, 2009 1:00 pm**

ok ill keep the serch happining, thats for the input anyway

ill have to find time to get to some wrecker and see if the 75, 80series wil work.

dan.

Posted: **Wed Aug 26, 2009 4:48 pm**

http://www.employees.org/~dirttrak/rear ... ersion.htm

Youd need a custom bracket to suit the backing plate pattern on the 60 axle though.

Posted: **Wed Aug 26, 2009 8:32 pm**

Try this guy
http://www.perth4x4.net/forum/showthread.php?t=28746

Be aware his conversion relies on a tailshaft handbrake.

Tim

Outer Limits 4x4 Board

60 series rear disc brake swap info needed.

60 series rear disc brake swap info needed.