Outer Limits 4x4 Board

im considering making my own bullbar for my f310...
just curious on anyone else whos done it and any advice on it?
and if anyone has template for the mounting brackets for a widetrack??
cheers

hey mate, i recently made a bullbar for a 310 as well. its not too difficult to design depending what you want. (eg. winch mounts, if you have a body lift, tube or plate). i will take some photos of mine tomorrow to show you what i did and how i mounted it.

Hey mate i made a tube bar for mine its pretty easy as long as you can weld supports on and that its pretty simple. Where the hole is in the middle is where the winch is going to sit and the fair lead has to screw onto.

Heres a few pics of mine this was before i put the LED indicators on and put the number plate on properly:


and stripped down ready to paint:


If you want anymore pics mate just let me know and I can take a few more snaps I'll put some more recent ones and put them up tomorrow i hope this helps mate.

Cheers,

Simon

yeah cheers.
just needed some ideas to get started off at. as to wat i want and managing making it.
but yeah cheers for the pics. and keepem coming if it aint too much of a hassle....
cheers

No worries at all mate, i'll take some new ones tomorrow for you

I had one made $650 for tube style! powder coated not painted.

some nice looking bars there fellas. i made mine out of 5mm plate so its nice and solid. have hit a tree off road with it and it came out fine





I am in the process of finishing a rear bar too. at the moment its a bit ghetto though.

Any body know how to make the side step bars?

yep.... get some 50mm pipe and a grinder and some plate.... ill take some photo's of them too

thanks mate I need some ideas to make some for my little beast

about to start on my bar formy 85 rocky.... hope it turns ot half as good as the ones shown above!

SXII were those pics taken in whyalla with the red dirt?? Looks like a spot we used to like to visit when we lived there!

A few more as promised

How i mounted my indicators:

Getting built:

Jumping in dunes at Loveday near Barmera, checkout there website! Like that solid bar! I will one day get to my rear bar!

cookiesa wrote:about to start on my bar formy 85 rocky.... hope it turns ot half as good as the ones shown above!

SXII were those pics taken in whyalla with the red dirt?? Looks like a spot we used to like to visit when we lived there!

Well heres a pic of a Rocky front bar then!!

sorry it took me so long to get back on to show you some pics of the sliders. These were build last min for a trip and are basic as to make. i mounted them the way i did so they could be removed easily (when i get round to doing a better job) and don't cause hangup problems along the chassis rails.

Thanks for the pics, ill start on mine