Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Exhaust for 1kzte

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 23
Joined: Wed Oct 22, 2008 10:38 pm
Location: Melbourne Australia

Exhaust for 1kzte

Post by MUDHOR »

Hey guys.
Going to do the exhaust on my 1kz, not sure what size 2 1/2'' or 3''.
what have use done cheers
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

Are you running a intercooler or higher boost?
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 38
Joined: Tue Dec 14, 2004 7:50 am
Location: GEELONG, VIC

Post by 4wdphil »

i recently fitted a 3" mandrel bent system from the back of the turbo. It is sensational. The turbo spools up faster, I have better acceleration and the note is very nice. It is not too loud nor does it drone.
Was going to get a sterling exhaust but they could not supply one for 3 weeks so my local exhaust shop (The Exhaust Brothers) made one up for me all mandrel bent,the works.

Hope this helps
IF IT AINT BROKE, DON'T FIX IT
Top
Posts: 23
Joined: Wed Oct 22, 2008 10:38 pm
Location: Melbourne Australia

Post by MUDHOR »

will be running higher boost before i get a intercooler.

Yeah 90% going to get exhaust bros down in melbourne to do the exhaust cheers...
Top
Posts: 899
Joined: Mon Jan 01, 2007 8:11 am
Location: West Seedknee

Post by 4bdan »

3" dump and 3" system with a straight through muffler seems to be the best set-up on the 1kzte...

Eng-Tek make a good 3" dump pipe, however he has just put his price up to $330.

Here's the link if you want to have a look...
http://www.eng-tek.com.au/product_info. ... cts_id=263
Back in a Lux again...
Top
Posts: 83
Joined: Sun Jan 18, 2009 3:18 pm
Location: MAFFRA

Post by paulm958 »

Did a bit of research on here, and purchased a Beaudesert exhaust, ill let you know how it goes,
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

The engine loves a 3" exhaust
hands and mums dont count!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 97 guests