Page 1 of 1
will this rim fits my 105?
Posted: Fri Aug 28, 2009 3:11 am
by disco4x4
Hi,
I have an urgent need for new rims
I could get this ones in IL
I'm using 285X75X16
will those with +60 offset will do the job ?
thanks
Roy
Posted: Fri Aug 28, 2009 3:22 am
by disco4x4
don't LOL me
it will not be Chrome .....
Posted: Fri Aug 28, 2009 3:41 am
by v840
I think they're for the IFS models. IIRC live axle models had zero offset. With +60, you may lose a fair bit of track width and possibly start scrubbing on tie rod ends etc. Wait for a cruiser guru to respond though, I'm only going off memory and it's late.
Posted: Fri Aug 28, 2009 6:48 am
by dow50r
they wont fit solid diff cruisers, et needs to be 0
Posted: Sat Aug 29, 2009 12:19 am
by disco4x4
thanks guys
saved me time & money
any recommendation for a good 16X8 ET 0 rims which are DOT comply ?
Posted: Sat Aug 29, 2009 8:18 pm
by crankycruiser
u can get those same rims with the right offset for 105's. a mate had a set on his 105
Posted: Sat Aug 29, 2009 8:20 pm
by crankycruiser
Posted: Mon Aug 31, 2009 12:57 am
by GO79
they will fit with wheel spacers and you need to take some of the center of the rim out to fit over the hubs and rear axles of the 105 series. the 100 series runs a semi floater axle in the rear so no stick out to hit and no hubs on the front to hit
Posted: Mon Aug 31, 2009 4:48 am
by disco4x4
any off the shelf prodcut that will fit with no spacer or mod. which is also DOT certified ?
Posted: Thu Sep 03, 2009 5:16 pm
by zoook
just buy some steel wheels 16x8 with 0 offset they will fit 65 bucks each everywhere .....
Posted: Thu Sep 03, 2009 8:25 pm
by disco4x4
Zoook,
as I'm based in Israel, can not get them here
would have to import
need to be DOT certified rims
any advice is welcome !!
Posted: Thu Sep 03, 2009 9:02 pm
by mike_nofx
Whats the urgent need?
Whats on there at the moment?
Posted: Thu Sep 03, 2009 9:06 pm
by fester2au
Not sure where you could get them over there but ROH are an Aussie manufacturer of quality wheels and the Impact is a popular 105 wheel as ROH make it for Toyota as well. Toyota call it the Royale and have it fully painted silver, ROH do it with a machined face and silver or black holes. They are approved rims here but not sure if they cover your DOT requirements.
http://www.roh.com.au/4wdsuvseriesimpact.php
They do a few 4wd wheels so maybe an email to them.