Outer Limits 4x4 Board

Hey all,

I'm chasing information about putting a 2 person seat in the rear of my Fj40.

i need info about what kind of seat i can use, seat belt mounting etc.

all help will be muchly appreciated.

Thanks

Paul

I made up a steel SHS subframe that bolted to the factory seat mounts in mine. The engineer said that if you wanted to weld plates in they had to be 100x100 (from memory so don't take it as gospel).

I used a Suzuki Vitara seat that had the belts and buckles mounted to the actual seat unit. Fitted snugly between the wheel arches. I've heard you can use Sierra rear seats also.



Speak to an engineer first though. They can tell you what's legal and what isn't. It shouldn't be that expensive to certify either.

v840 wrote:I made up a steel SHS subframe that bolted to the factory seat mounts in mine. The engineer said that if you wanted to weld plates in they had to be 100x100 (from memory so don't take it as gospel).

I used a Suzuki Vitara seat that had the belts and buckles mounted to the actual seat unit. Fitted snugly between the wheel arches. I've heard you can use Sierra rear seats also.



Speak to an engineer first though. They can tell you what's legal and what isn't. It shouldn't be that expensive to certify either.

awesome thanks for your help.