Page 1 of 1

best flexing 2 inch kit for 79 cruiser ute

Posted: Sat Aug 29, 2009 8:54 pm
by j dizzle
just looking at gettin a 2 inch lift for the 79 nd obviously wanna get decent flex out of it.....i know i wont get the best flex being cruiser arse but im hoping i can get a bit better than stock...im thinkin bout gettin a efs kit wat do u guys reckon ??

cheers josh

Posted: Sat Aug 29, 2009 9:08 pm
by blackout
if you want your car to megaflex

get into autobarnz

Posted: Sat Aug 29, 2009 9:11 pm
by SIMMO84
blackout wrote:if you want your car to megaflex

get into autobarnz
Lookin for a ticket for a bus ride? :roll:

Posted: Sat Aug 29, 2009 9:13 pm
by j dizzle
??

Posted: Sat Aug 29, 2009 9:21 pm
by berad
Does the truck, carry heavy loads a fair bit?, i'd start by pulling 2 or 3 of the bottom leaves, invert the rear shocks (triangulate). If it still doesn't work take some more out so long as it doesn't sag to much.

Or try and find a set of 2nd hand 2-3inch lift springs use the 2-3 main leaves from the lifted pack and put 2-4 leaves in from your stock pack.

I see no reason why a cruiser cant flex pretty decent with a bit of trial and error providing you don't put heavy loads on it for work etc.

Posted: Sat Aug 29, 2009 9:24 pm
by j dizzle
well i tow a 6x4 builders trailer bout once a week from jobsite to jobsite nd every now nd then throw a few hardwood beams on top nd some ladders?? i hate my job sometime haha

Posted: Sat Aug 29, 2009 9:37 pm
by berad
That should be ok, springs sag faster and will axle wrap under constant heavy load. Give it a try it costs next to nothing. It cant be any worse articulation wise.

Posted: Sat Aug 29, 2009 9:40 pm
by j dizzle
this is true cheers