Page 1 of 1
hilux injecter pump lines 2.8
Posted: Sun Sep 06, 2009 2:50 pm
by _noddy
Hey i need help . I pulled my injecter pump out to get reco and i didnt mark the injecter lines so witch lines go where so could some1 help me out its a 2.8 . chrees Noddy
Posted: Sun Sep 06, 2009 4:02 pm
by Team Slammer
hey mate i have a 2.4 hilux so dont know if it will be the same,but looking from passenger guard at the pump the outside bottom is no 4 the top is no3 inside bottom is no 2 and inside top is no 1. hope this helps not 100% if pumps are the same.
Posted: Sun Sep 06, 2009 5:21 pm
by berad
...............
Posted: Sun Sep 06, 2009 8:09 pm
by joel HJ60
Shouldn't be too hard to figure out.
Do an image search on Google. You may get lucky if you can't nut it out.
Posted: Sun Sep 06, 2009 8:19 pm
by IN24BZ
well iirc if you get them the wrong way round ie 2 both pairs of 2 are clamped together 1 pair will hit the dipstick if this is the case its the wrong way round at the pump
Posted: Sun Sep 06, 2009 8:23 pm
by _noddy
clamps got pulled of them i took it in with the lines on it
Posted: Sun Sep 06, 2009 8:50 pm
by Dzltec
Top inner is N01, then goes clockwise looking at it from the rear of the vehicle. Firng order is 1342.
Andy