Outer Limits 4x4 Board

Gday fellas, my brakes dont hold on a hill or when i brake while reversing they are fine while stoping when vehicle is going foward. Thought i would put a post up and see if this has happened to anyone else before i go out to the shed and start pulling them apart. I have a 1978 BJ 40 drums front and rear uses no fluid and pedel feel is good they just dont pull when going backwards. Any ideas would be great hopefully i get a chance to have a look during the week. Thanks

they are drum brakes they only work in forward and not even well
do a disk conversion

tiny80 wrote:they are drum brakes they only work in forward and not even well
do a disk conversion

x2

or just look if you need new brake shoe linings