Outer Limits 4x4 Board

does anyone know of any company that make a complete wiring harness to suit the fj40 in australia?

not that I know of, Where abouts are you located? Could maybe do something for you.

Steve

in sydney mate. i would go to an auto electrician but i prefer to do most of the work myself.

Hardzy wrote:does anyone know of any company that make a complete wiring harness to suit the fj40 in australia?

why do you want a new one?
better to get a second hand one and clean it up and install it, unless your making a custom one.
the only thing that i would replace is the origional fuse box, toss it for a blade type installation of another type of vehicle.

JEs

i bought one with about 50 wires attched in some way to another wire. several by ordinary sticky tape. there are wires going to nowhere. all iwant is a wiring harness that will run the all the lights, blinkers, wipers and the standard engine accessories. no guages need to be accounted for as all custom gauges are being put in.

doesnt sound to hard but impossable to find. and the local auto electrician in newcastle wants 800 to do it. and it should be less than a days work. i have already stripped most of the wires.

i have 3 of 4 sets lying around the place, , but they are all late model ones. i threw a complete early model one in the skip a few weeks ago though it might be still there, i'll have a look for you tomorrow.
what year model is your truck, what engine?

Jes

hey jess. very first yar model fj40 swb with a 2f motor in it.