3 link Aframe update
Posted: Mon May 10, 2004 10:02 pm
Slowly getting this rear suspension sorted.
Progress so far...
A frame is built, I've made it out of 50mm steam pipe
using the rear shackle mounts off the chassis to swing it
off a extra x member, I've used a ball joint off a nissan
navara to mount it off the diff.
Went to the wreakers today and picked up 2 trailing
arms off a 1998 izusu bighorn (900mm eye to eye)
Springs off the front of a 1992 falcon station wagon.
Mount shocks and shes done then on to the front.
Will be sorting out some photos in the near future
Progress so far...
A frame is built, I've made it out of 50mm steam pipe
using the rear shackle mounts off the chassis to swing it
off a extra x member, I've used a ball joint off a nissan
navara to mount it off the diff.
Went to the wreakers today and picked up 2 trailing
arms off a 1998 izusu bighorn (900mm eye to eye)
Springs off the front of a 1992 falcon station wagon.
Mount shocks and shes done then on to the front.
Will be sorting out some photos in the near future