Outer Limits 4x4 Board

G,day

Im selling my d22 navara ute as i dont need it no more and theres a bloke who would buy it but only if i take out the 3inch lift it has in because he doesnt need any lift in it ( dont know why ) so im gonna take out the lift but cant remember what the stock ride hight ( ground clearance) for teh navara is???


any help would be good,

cheers

danny

How did you do the lift?, is it a body lift?, spring lift?, crank the torsion bars and blocks?, my guess is you will have to get standard springs put back in to lower it, which will give you the factory hight.

Are you putting the stock rear springs back in???

If so, just adjust the front torsion bars so the front sits about 1" lower when the trays empty

It's possible he is selling it with a few bags of concrete?

Dave87 wrote:It's possible he is selling it with a few bags of concrete?

Or 5psi in the tyres....

What clearances do you need to know? Can find out for you later on today.

I would guess 3" lower than what you have now

Cheers for the help so far fellas but yes i need to take out the 3inch lift, and yes im guessing it will be stock than but i dont have the orignal leaf springs cause i sold em, and in the front the torsion bars have been taken out and twisted for more hight and also there is a 1 inhc blody lift on it but what i need to know is waht the stock ride hight for the navara.

cheers for teh hepl so far fellas

Danny

Rough measurement is 365mm to the bottom if the chassis.

If you want anymore let me know.

Thats on a STR, if you want the measurement of a DX I can get it Tuesday for you.

What a PITA that it, I'd just sell it to someone else who wants a lift!

thanks for that measurment mate, and yea i would sell it to someone who wants it with a lift but i have a bloke who is looking for a lift ofr his navara and hes gonaa buy the one im taking out of mine

Cheers for all teh help fellas

Danny