hi guys
there's heaps of stuff on G16B but not G16A,
what i would like to know is what supply's i'll need to do the swap
eg. hoses, fuel line, fuel pump.
or is there a "How to" on here somewhere or does anyone know where to find one
the reason i'm asking is i've only got 1 car and need to do the swap as fast as possible and for it to go as smooth as possible,
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sierra Engine swap to G16A
heres a step by step guide for a 1600 conversion.. did mine about 5 months ago..
http://www.auszookers.com/index.php?nam ... conversion
http://www.auszookers.com/index.php?nam ... conversion
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
thanks bud but its for the G16B not A (efi not carb)
i know that most things just bolt back the same way (especially using the BenT kit) but just wanted to find out if there's anything that i'll need (eg. a small bit of pvc pipe to adapt the carby if i want to use the 1.3 air box not the top mount vit air filter etc.)
i just don't want to get caught out half way thru and realise i need something i haven't got that a quick question could have avoided
thanks again
i know that most things just bolt back the same way (especially using the BenT kit) but just wanted to find out if there's anything that i'll need (eg. a small bit of pvc pipe to adapt the carby if i want to use the 1.3 air box not the top mount vit air filter etc.)
i just don't want to get caught out half way thru and realise i need something i haven't got that a quick question could have avoided
thanks again
Who is online
Users browsing this forum: No registered users and 12 guests