Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series with 308 efi power steering pump problem

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3
Joined: Sat Jul 18, 2009 11:20 pm
Location: vic

80 series with 308 efi power steering pump problem

Post by brenhbjh »

hi all I have a 80 series with a vq 308 efi in it whats happend is my power steering pump (vq pump) has hit the power steering box and cracked it so now the pump is leaking, i wanna replace it with a smaller pump so there will be enough space so this doesnt happen again any suggestions
anybody had similar problems
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

Not to sure but with the statesmans the faster your going the harder the steering maybe they have a different pump to the standed holden v8 pump and june 85 holden changed from 308 to a 304
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

how did you mount it to hit?
ok im using a 60 chassis, but 80 box and holden pump.
and mines miles away.
im wondering what pump will fit?

im not sure on the comment above though, the higher revs i give mine the easier the steering seems to be?
unless mine is different?
but from VN-VR im pretty sure the power steer pump is the same unit.

are you sure they are speed sensitive? they look just like your everyday power steering pump?

Twon
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 3
Joined: Sat Jul 18, 2009 11:20 pm
Location: vic

Post by brenhbjh »

I bought my car already done but the pump is the old style so the reservoir and pump are one ive spoken to dealers of krc pumps they reacon it will fit but i could lift motor mounts to make it higher up anyone know where i could get motor mount lifts
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

DIRTY ROCK STAR wrote:how did you mount it to hit?
ok im using a 60 chassis, but 80 box and holden pump.
and mines miles away.
im wondering what pump will fit?

im not sure on the comment above though, the higher revs i give mine the easier the steering seems to be?
unless mine is different?
but from VN-VR im pretty sure the power steer pump is the same unit.

are you sure they are speed sensitive? they look just like your everyday power steering pump?

Twon
yes the stesmans from vq are def spped sensitive maybe its not the pump it might be the rack in sted
Top
Posts: 3
Joined: Sat Jul 18, 2009 11:20 pm
Location: vic

Post by brenhbjh »

well i managed sort out a pump i am putting a vn pump in with a remote reservoir so save space so it shouldnt happen again
Top
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Post by Breaker Brother »

DIRTY ROCK STAR wrote:how did you mount it to hit?
ok im using a 60 chassis, but 80 box and holden pump.
and mines miles away.
im wondering what pump will fit?
60's have wider rails than 80's and lux's ;)

brenhbjh wrote:well i managed sort out a pump i am putting a vn pump in with a remote reservoir so save space so it shouldnt happen again
Love to see how you mount it, I'm going to have to do the same.
Ban Warning labels and let Darwinism rule![img]http://www.downunder4x4.net/forum/images/smilies/pray.gif[/img]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 16 guests