I would like to put the draglink under the pitman arm like a GQ, I know people have done this to an MQ/MK pitman arm and was wondering what is involved in doing this?. And would a GQ pitman arm fit an MK power steer box??
Cheers
Hoppy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MK pitman arm
MK pitman arm
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
God of Magnificant Ideas!
99% sure that a GQ arm wont fit the MQ / MK box
Re-drill the MQ arm from the bottom side to take a larger ball joint, Toyota make a large taper ball joint that also screws to the MQ link.
From memory the larger part of the MQ taper is the same size as the small part of the taper on the yota ball joint.....
sorry cant recall the yotas part number but most auto shops or even a toyota dealership will be able to help you out
Re-drill the MQ arm from the bottom side to take a larger ball joint, Toyota make a large taper ball joint that also screws to the MQ link.
From memory the larger part of the MQ taper is the same size as the small part of the taper on the yota ball joint.....
sorry cant recall the yotas part number but most auto shops or even a toyota dealership will be able to help you out
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Who is online
Users browsing this forum: No registered users and 4 guests