vit power steer
Posted: Tue Sep 15, 2009 9:04 pm
hey all so i have read i think every post possible in the search for vit steer into my sierra.
i have had a setup for ages now and decided its time to finally put it in.What i am not fully sure on without actually doiong the job and sitting the new box up there is if i just redrill the chassis and sleeve it or plate the chassis on the outside will the radiator have to be moved across or could i just play around with the one bracket as i cant really move it due to the shroud and 1.6 fan.
Also what setup do different people use?wedge,10mm plate or redrill?mocking it up on a front chassis section i have hear it has 32 ish mm clearance from bottom of chassis to top of pitman arm would this be enough?thanks,matt
i have had a setup for ages now and decided its time to finally put it in.What i am not fully sure on without actually doiong the job and sitting the new box up there is if i just redrill the chassis and sleeve it or plate the chassis on the outside will the radiator have to be moved across or could i just play around with the one bracket as i cant really move it due to the shroud and 1.6 fan.
Also what setup do different people use?wedge,10mm plate or redrill?mocking it up on a front chassis section i have hear it has 32 ish mm clearance from bottom of chassis to top of pitman arm would this be enough?thanks,matt