Outer Limits 4x4 Board

Posted: **Wed Jan 29, 2003 11:58 pm**

who in bris or goldcoast will beadlock ya rims for ya :?:

Posted: **Thu Jan 30, 2003 9:15 am**

Why dont you look at getting some internal beadlocks? You can fit them yourself and they lock both sides of the tyre.

Posted: **Thu Jan 30, 2003 9:49 am**

and are streetable

Posted: **Thu Jan 30, 2003 10:06 am**

but they dont look cool like normal external beadlocks :oops:

Posted: **Thu Jan 30, 2003 11:28 am**

Sometimes cool and `road legal' are different things..........don't get me started on insurance issues.
Cheers,

Drewfus

Posted: **Thu Jan 30, 2003 12:36 pm**

i know that beadlocks are illegal on the road, but how legal are those internal one's? what if you had a smash which damaged your rims and tyres and the insurance accessor spotted the internal beadlocks?

Posted: **Thu Jan 30, 2003 1:10 pm**

Drewfus wrote:Sometimes cool and `road legal' are different things..........don't get me started on insurance issues.
Cheers,

Drewfus

Dude dont start on insurance, road legal blah blah blah!

There is already enough of those types on here :roll:

Posted: **Thu Jan 30, 2003 3:36 pm**

mechanic beadlocks offer the advantage of adding strength to the rim, as you can still push the Tirelocs bead and get Crap in etc,

I have Beadlocked ROH rims on my Q78 and at times, wonder if it is worthwhile, constantly checking the bolts are tight etc, although the do work well.

Inner bead isn't too important, as i have enough trouble breaking the rear bead with the tyre changer as it is!

Steve
(although i am keen to try a set of Tirelocs on the New swampers...)

Posted: **Thu Jan 30, 2003 4:43 pm**

Thats a valid point about strengthening the rims. What we have done to get this is mig weld a 5mm rod to the rim on the outside edge of the bead. Every rim was inspected after the Vic Winch Challenge and all were still round .

Posted: **Thu Jan 30, 2003 5:48 pm**

drew wrote:Thats a valid point about strengthening the rims. What we have done to get this is mig weld a 5mm rod to the rim on the outside edge of the bead. Every rim was inspected after the Vic Winch Challenge and all were still round .

There were a couple of CVs that were'nt bloody round though :finger:

Posted: **Thu Jan 30, 2003 6:06 pm**

Made mine myself

They have never gone down and i have never rolled the inner bead off, i run the CLAWS at 1.5psi to 3psi all the time!!!

Posted: **Thu Jan 30, 2003 6:55 pm**

ray belleau race wheels, brisbane rd labrador

or

Dave
07 55326716

nick

Posted: **Thu Jan 30, 2003 7:10 pm**

or

Dave
07 55326716

who is dave..
I have been seriously thinking about bead locks myself ...and i dont see why i should pay someone to fit something to my rim that i am perfectly capable of organising myself..

does anyone make a weld-on kit ?

Posted: **Thu Jan 30, 2003 7:28 pm**

Yes Ray will supply just the rings if you want to weld them on.

Posted: **Thu Jan 30, 2003 7:43 pm**

dave, dont know him, he just gave me his number and said "i make beadlocks" that was it, call him and sus it out.

Bigballs also make the weld in kit

Posted: **Thu Jan 30, 2003 8:34 pm**

swheet

Posted: **Thu Jan 30, 2003 10:48 pm**

try tom at oz wheels in syd
he has a weld in kit and i think his outers are the best on the market they are a preesed steel outer 4 mm thick and there are better quality steel (strength )
iners are 6mm
and has 20 8mm bolts
and as for them coming lose i have never had a problem
i have nylocs on the back so they dont move

see the outers on my truck pics

Posted: **Fri Jan 31, 2003 7:32 am**

POS wrote:Made mine myself

They have never gone down and i have never rolled the inner bead off, i run the CLAWS at 1.5psi to 3psi all the time!!!

i have a copyright on that photo :finger:

Posted: **Fri Jan 31, 2003 7:47 am**

bj on roids wrote:i have a copyright on that photo

That reminds me, where are the royalty cheques for my photos used on all the XRCC advertising?? :finger:

Posted: **Fri Jan 31, 2003 1:11 pm**

Anyone got any idea what Snake Racing's new billet beadlocks are worth?

I think Guts is running them but I'm guessing he didn't pay retail.

Are they full wheels or weld ons?

Posted: **Fri Jan 31, 2003 4:40 pm**

If you want good looking bead locks that are strong and won’t leak PM me and I’ll give you the contact details…. :wink:

Posted: **Fri Jan 31, 2003 6:05 pm**

I believe that Brett Grinrod from CORE 4x4 also manufactures/sells them.

Posted: **Fri Jan 31, 2003 6:09 pm**

albyone, why not post it here ?
Had a chat to ray today, $150 to fit beadlocks to your rim, $120 supply only steel inner ring and alloy outer ring.
i broke a section out of my JT outer ring and ray said his can bend 90 degrees and not break.
he also fits beadlocks to alloy mags.

Posted: **Sat Feb 01, 2003 3:21 pm**

ALPINE-OFF-ROAD wrote: i think his outers are the best on the market they are a preesed steel outer 4 mm thick and there are better quality steel (strength )
iners are 6mm
and has 20 8mm bolts

my inners are 12mm outers are 10, have both alloy and stell outers and all have 24 bolts.

NICK

Posted: **Sat Feb 01, 2003 3:25 pm**

big red wrote:albyone, why not post it here ?
Had a chat to ray today, $150 to fit beadlocks to your rim, $120 supply only steel inner ring and alloy outer ring.
i broke a section out of my JT outer ring and ray said his can bend 90 degrees and not break.
he also fits beadlocks to alloy mags.

MAKE SURE you get what you pay for, and what he shows you you will be getting

NICK