Outer Limits 4x4 Board

i have a 93 rocky running a standard motor atm.
im lookin into gettin an exhaust made up for the car just wondering should i upgrade the standard turbo or are the standard ones good enough just saves me having to replace the turbo down the track as well as a dump.
also wanting to install a top mount cooler just wanting to know wat cooler i could use patrol, crusier or hilux or will i need an after market one
any help is appreciated thanx Z

http://www.outerlimits4x4.com/ftopic185 ... 606667501d

buy this

i could but i have a mate who can make it cutting my costs down. thanx tho

anyone else with ideas?

I run a 2 1/2 inch system right up to the turbo on my 92 tdi rocky. Have 3 hotdogs in line and it's not loud at all. Just a nice whistle when you put your foot down and the windows open.
If you cut the turbo flange off the factory exhaust its important to machine this out. The max diameter you'll get is about 2 1/4 inch as much more than this will be in the way for the flange bolts.

Personally I would stick to the standard turbo and intercooler. It's a reliable package. You'll get better air flow through a front mount than a top mount anyway.

I used AAA Exhaust, Deacon Ave, Richmond to help out with my exhaust before I moved to WA. They have one of only a few mandrel beanding machines in the state.

Cheers.

thanx for that dude

i went 3" zorst with 1 hotdog, and wound the turbo up to 14psi on the dyno which was the max for the turbo even with the wastegate jammed shut. I fitted a large front mount which made a huge difference especially in the sand.