Page 1 of 1
engine conversion on NH Paj
Posted: Thu Sep 17, 2009 10:08 pm
by gleno
Hey am wondering if anyone has done a 3.8 comm v6 in a 3l Paj?
Posted: Fri Sep 18, 2009 1:12 am
by kev500sa
Hi, done a 3.8l conversion to a 3.0l. also other engine mods. cheers
Posted: Thu Sep 24, 2009 3:15 am
by MontyMcV
OldColt on 4x4Wire did a 3.8 non-MIVEC into a US spec 95 SR (3.5 DOHC).
Posted: Thu Sep 24, 2009 11:28 am
by Guy
I know the motor is cheaper .. but it is not nearly the quality of the mitsu motor and you need all sorts of mucking about and adapter etc to put it in .. and its only 7Kw more than the mitsu 3.5 which is a bolt in..