Page 1 of 1
85 NT Drover Uni joints
Posted: Sat Sep 19, 2009 5:33 pm
by Kitika
G'day,
Every single unijoint in the drover is shagged. The gearbox jackshaft, rear and front driveshafts 6 uni's in total. Are all the uni joints the same WT and NT or did the 1.3's have bigger ones compared to 1.0 litres?
Cheers
Posted: Sat Sep 19, 2009 8:04 pm
by mrRocky
I think they are pretty much the same, but the method which the clips work is different.
I was stuck and had to use a w/t uni that i used the clip from that on 2 sides and had to tack weld the other two sides in.
so i guess you can make it work but i think its best to get the correct one
Posted: Sun Sep 20, 2009 11:44 pm
by Pagie
All 1.3 (84-98) and W/T Maruti (92-99) uni's are the same, OEM P/N 27200-83811, aftermarket RUJ1783 or K5A556.
Might even get some shameless promotion in while I'm at it
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :MESELX:IT
Posted: Mon Sep 21, 2009 12:00 am
by Kitika
So as long as I don't get 1Litre ones i'll be fine? Cheers thanks for your help!
Posted: Mon Sep 21, 2009 12:46 pm
by weaves
thats right. 1ltrs have 22mm caps, 1.3ltrs have 25mm caps.
weaves