Outer Limits 4x4 Board

Posted: **Sat Sep 19, 2009 8:28 pm**

G'day
i'm going to make a custom front bar for my bundera but don't know what size steel and design. can any one help me by posting pic's to give me a idea thanks

cheers reece

Posted: **Sat Sep 19, 2009 9:00 pm**

click "the ufo" link below.

Posted: **Sun Sep 20, 2009 6:44 am**

There is a heap of pics in nissan section and this one. Search tube bars or something like that. alien has posted in it too so put that in the search also.

Posted: **Sun Sep 20, 2009 9:48 am**

Posted: **Sun Sep 20, 2009 2:05 pm**

Posted: **Sun Sep 20, 2009 2:15 pm**

11_evl wrote:

don't know who owns that or built that bar so sorry in advance if I offend in any way but holy crap that look terrible

btw if that is your bundy in the avatar, what about chopping off the tube from the bar and put a single hoop on the front, looks a little different if thats all your looking for

Posted: **Sun Sep 20, 2009 7:42 pm**

i was thinking of chopping the top tube off the bar i got but i got most of the steel for a bar, but i mite do that

Posted: **Sun Sep 20, 2009 9:17 pm**

Posted: **Mon Sep 21, 2009 9:40 am**

Weiner wrote:

that the design i was thinking, the bar i got on it now isn't a winch bar and i want a winch.

Posted: **Mon Sep 21, 2009 10:31 am**

REECE_O wrote:
Weiner wrote:
that the design i was thinking, the bar i got on it now isn't a winch bar and i want a winch.

If you want any more pics let me know and I will PM them to you.

Posted: **Mon Sep 21, 2009 10:35 am**

Tiny wrote:
11_evl wrote:

don't know who owns that or built that bar so sorry in advance if I offend in any way but holy crap that look terrible

btw if that is your bundy in the avatar, what about chopping off the tube from the bar and put a single hoop on the front, looks a little different if thats all your looking for

It looks almost as bad as the one in your avator

But yes I agree

Posted: **Mon Sep 21, 2009 12:32 pm**

isnt that team advanti racing??? last 2 yrs at tufftruck??

Posted: **Mon Sep 21, 2009 12:52 pm**

DUDELUX wrote:isnt that team advanti racing??? last 2 yrs at tufftruck??

Beat me to it.

Posted: **Mon Sep 21, 2009 3:56 pm**

Anyone know what sort of weight a basic tube winch bar is? If not built too overkill?

Posted: **Mon Sep 21, 2009 4:20 pm**

-Nemesis- wrote:Anyone know what sort of weight a basic tube winch bar is? If not built too overkill?

light enuf to fit by myself, heavy enuf to stand up to that tree i hit, and that pajero i pushed off a rock, and that navara i roll started, and that lump of solid earth that hit me, and that courier i pushed outa the way of the fuel pump, and that pulsar that was parked in the way....

(the courier was a mates, and the pulsar was mine, so it wasnt road rage

)

Posted: **Mon Sep 21, 2009 7:21 pm**

-Nemesis- wrote:Anyone know what sort of weight a basic tube winch bar is? If not built too overkill?

With winch w/steel cable on it I can pick my bar up myself, not too sure on a weight though.

Posted: **Mon Sep 21, 2009 8:32 pm**

Would love to make one but not sure on how it'd look. My problem is the intercooler piping on the passenger side runs fairly low on the edge, making the lower wing hard to design without sticking forward. You can't see it behind the TJM bar, but I don't think a winch will fit in it because of the cooler itself....

I could always revise the pipe path a bit, but clearances are tight as is... Damn custom trucks...

Posted: **Tue Sep 22, 2009 3:20 am**

Tiny wrote:
11_evl wrote:

don't know who owns that or built that bar so sorry in advance if I offend in any way but holy crap that look terrible

btw if that is your bundy in the avatar, what about chopping off the tube from the bar and put a single hoop on the front, looks a little different if thats all your looking for

Some barwork you see looks like the playground equipment I played on when I was a schoolkid (showing my age now )

Posted: **Tue Sep 22, 2009 9:43 am**

what is the best size tube and steel to use ?

Posted: **Wed Sep 23, 2009 1:59 pm**

REECE_O wrote:what is the best size tube and steel to use ?

chromolli

Posted: **Fri Sep 25, 2009 8:25 am**

my dad keeps saying i should just lift the bar i got on it

Posted: **Fri Sep 25, 2009 3:08 pm**

right so you have fitted a body lift and the current bull bar doesn't line up?

If that is the case then yes just do as your dad said.

What possible benefit are you going to gain by going a tube bar?

Posted: **Fri Sep 25, 2009 3:45 pm**

grimbo wrote:right so you have fitted a body lift and the current bull bar doesn't line up?

If that is the case then yes just do as your dad said.

What possible benefit are you going to gain by going a tube bar?

cause they look

what else matters!

Posted: **Sat Sep 26, 2009 8:41 am**

HLX.GRL wrote:
REECE_O wrote:what is the best size tube and steel to use ?
chromolli

i did this only once they crack

Posted: **Sat Sep 26, 2009 3:33 pm**

grimbo wrote:right so you have fitted a body lift and the current bull bar doesn't line up?

If that is the case then yes just do as your dad said.

What possible benefit are you going to gain by going a tube bar?

Strength and extra clearance. I made mine to look like a standard bar as I didn't want it to stand out but ARB/TJM bars bend too easy if you give them a hard time.