Page 1 of 1
resomat sound proofing
Posted: Mon Sep 21, 2009 9:20 pm
by micktroopster
has any one used resomat in their vehicle and was it succesfull in getting the noise level down??cheers mick
Posted: Mon Sep 21, 2009 10:37 pm
by 80's_delirious
what is it made of? and how much is it?
I used 10mm foil backed closed cell foam from clark rubber, its available with self adhesive one side. It made a big difference.
Posted: Tue Sep 22, 2009 8:41 am
by micktroopster
its 2.7mm tar [black stuff] with silver backing its about 175 for 3ish square metres
Posted: Tue Sep 22, 2009 7:53 pm
by Feass
How much was the stuff from clark rubber?
Posted: Tue Sep 22, 2009 8:02 pm
by 80's_delirious
I cant remember, it was a couple of years ago, I think it was around $10/m2 maybe $13/m2 for the adhesive backed one
Posted: Tue Sep 22, 2009 8:49 pm
by Feass
Yeah, cuz i have stripped the yukky vynal in my 79 cuz it was going foul due to all the shit i split in the car haha. None the less, im looking to sound proof the firewall on the engine side and soundproof the back and floor of the cab so i minimize heat and noise.
Would the clarky rubber stuff be the best?
Posted: Tue Sep 22, 2009 9:00 pm
by micktroopster
picked the resomat today will be installing it next week will give an update when its done ,cheers
Posted: Mon Sep 28, 2009 3:50 pm
by micktroopster
just finished the front and rer seat ares in the troopy took it for a drive seems heaps quieter taking it down the freeway tonight will give update later
Posted: Wed Sep 30, 2009 5:36 pm
by micktroopster
just went down the freeway its cut down the noise by about 30% works good !!!