Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rb30 5 speed swap to auto

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

rb30 5 speed swap to auto

Post by 76patrol »

so as it says above, i want to swap my gq 5speed for a 4 speed auto. can i just pull the rear housing off a vl or skyline auto and bolt it to my transfercase? thanks in advance. ray
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Posts: 1081
Joined: Sun Jul 20, 2003 10:43 pm
Location: Melbourne

Contact:
Contact B.D.R

Post by B.D.R »

I don't think the Transfer will bolt upto an auto out of a VL or Skyline.

But there is an adapter for a T700, for a VL so using that and then another adapter you can bolt the Transfer to the Greabox.

I don't know if it will all fit though, i'm still looking into it :D
Top
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

Post by 76patrol »

thanks, with the length of adaptors it could be a bit of a squeeze ,my d/s angle on the back isnt the best even with a high pinion and my front shaft is rather long already. i would like a auto though.
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Posts: 1081
Joined: Sun Jul 20, 2003 10:43 pm
Location: Melbourne

Contact:
Contact B.D.R

Post by B.D.R »

If the 2.8 GU Diesel, comes with an Auto that will bolt up, as they are the same motor :D
Top
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

Post by 76patrol »

champion. thanks for that
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

I have a GU shorty with an RD28 auto :cry:
What else would be required to fit the RB30 to it though? Would I need a flex plate etc from a commy auto?
Top
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

Post by 76patrol »

kiwi i swapped my ford 250 for a rb30 it was easy as. a bit of wiring, mounts, bellhousing all bolt up. swap dash cluster. prob flex plate. check out turbo calis. com for the info you need. good swap imo.
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

The conversion itself seems fairly straight foward, but would be much easier with a manual.
My problem is, I know a few people who have done the conversion, but none of them auto.

It will add another $2750 if I convert to manual, as the RD28 Patrol was never sold here, so I would need to get a boc via oz, plus flywheel etc. If I could use my existing auto, I wouldn't hesitate in the swap.
Last edited by KIWI on Sat Sep 26, 2009 6:09 pm, edited 1 time in total.
Top
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

Post by 76patrol »

you could consult a sparky about the computer. i think youd need to keep the auto puter and mabey piggy back a vl or skyline one on for the engine. i am quite happy with my rb30 swap and thats before the injection and turbo :D
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Posts: 172
Joined: Thu Jul 15, 2004 7:34 am
Location: Denmark

Contact:
Contact Hobbz

Post by Hobbz »

Your flexplate should fit the rb30 ...
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests