Page 1 of 1
want to get rim fliped in sydney
Posted: Tue Sep 22, 2009 7:50 pm
by brendan_h
im in the blacktown area and would like to get my rims fliped or somthing so i can get more a bigger offset.
anyone know of a place that can do them?
thanks
Posted: Tue Sep 22, 2009 10:28 pm
by -Nemesis-
Mate give Chris a ring at HiTech 4x4. They don't do them, but I know they organised some for a customer a while back so he should know who to try.
www.hitech4x4.com.au
Posted: Tue Sep 22, 2009 10:49 pm
by grubb
go see jmac
he done my mates he,s in blacktown area on holbeche rd
Posted: Tue Sep 22, 2009 11:32 pm
by brendan_h
Seems jmac does eveything. I've had my gear at his shop before. I would prefer to get them done at a place who just do wheel modification/repairs as I will be driving on theses things at 100kmh
Posted: Wed Sep 23, 2009 12:09 am
by Harb
Mob in liverpool called Morton and May........
They can weld an alloy mag back together after a prang......so rim flips are a piece of cake......
Morton and May
Address
2B El Toro Est Homepride Ave
Warwick Farm
NSW, 2170
Australia
Contact Details
Ph:
(02) 9601 7000
Posted: Wed Sep 23, 2009 11:12 am
by BlueSuzy
Special FX Wheel repairs in Mt Druitt
http://www.aussieweb.com.au/details.aspx?id=2116483
I've been to him about 4 times with cracked alloy rims. (sh!t rims)
There is also one at kings park.(close to blacktown near picknpayless)
http://www.aussieweb.com.au/details.aspx?id=2116483
Been there for a quote but special fx was cheaper.
Posted: Wed Sep 23, 2009 11:17 am
by brendan_h
im at tafe today so might go cheak them out see what they can do
Posted: Wed Sep 23, 2009 12:37 pm
by brendan_h
just go back from fx. Basicly he said $120 to $150 depending on how hard it is ect. He said if its easy he can sandblast them and prime then at no cost or get them powdercoated black at $40 a rim. He recons i can probably get 4inchs out of them
but im not afta that extream.just want 2 or 2.5inch extra.
He is gana be busy for 2weeks so he wont be able to do them for 2weeks. Might go visit this place in kings park anyone got the details? Im on my phone so its hard to find. The link was the same
Posted: Wed Sep 23, 2009 1:57 pm
by HLX.GRL
Harb wrote:Mob in liverpool called Morton and May........
They can weld an alloy mag back together after a prang......so rim flips are a piece of cake......
Morton and May
Address
2B El Toro Est Homepride Ave
Warwick Farm
NSW, 2170
Australia
Contact Details
Ph:
(02) 9601 7000
Qouted me 150 -250 a tyre a lil pricey if you ask me ..
Posted: Wed Sep 23, 2009 1:59 pm
by BlueSuzy
sorry brendan i fooked up my post
Custom Painting & Wheel Repairs
11/11 Romford Rd
Kings Park NSW 2148
(02) 9621 3355
Posted: Wed Sep 23, 2009 2:17 pm
by brendan_h
is that on the same street as pick and payless? Dont matter they dont do steel rims. Anyway rang jmac gana see him this arvo