Outer Limits 4x4 Board

hi there guys

just wondering if there is a difference in the GU patrol shifters within the different models, etc

does anyone also make a short shifter for them?

thanks for any help

Short shifter pretty easy,

alloy block, tig weld extended pin on the stick.

Dont go any more than 14mm though, or you will keep catching the synchro's when it tries to shift.

thanks Assassin_Offroad
do you have a step by step guide?
or even a picture of a short shifted gear stick?

thanks!
=)

alloy block machined to space lid of shifter up 14mm

cut ball off gear stick and weld on another one from another stick to make it 14mm longer with tig.

Once you look at it, the above will make sense.

You could give Bryan fom unlimitedindustries.com.au a try. His design is far better than the above idea. He has manufactured a complete bolt on replacement so when you change vehicles you can take the shifter with you.

thanks for all the advice

unlimited1 can you pm me bryans number as the site does not have any phone numbers
thanks!

disregard that last post... found a number... i'll give it a go tommorrow

Just what I have been looking for!

left a message for him.

Jimmy