Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ rotor scrap thickness??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

GQ rotor scrap thickness??

Post by hiluxmad »

any one know the bin/scrap thickness for GQ rear rotors?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 309
Joined: Tue Dec 03, 2002 11:43 am
Location: SOMEWHERE IN VICTORIA

Post by TUFF MAV »

16mm minimun
BUGGERED IT'S A TOYOTA THING
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

cheers mate.
normally they are marked but these ones aren't but i wil prob go newies anyway as it has to go through engineers
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

hiluxmad wrote:cheers mate.
normally they are marked but these ones aren't but i wil prob go newies anyway as it has to go through engineers
rear rotors $80 a pair new from RDA or is it RBA...

any who they are easy to fit
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

yeah i get em a bit cheaper on trade account.
it was more a matter of interest thing with thickness.
i have replaced everything else as i go so why should these be any different..
just wondering if they are worth keeping as spares or use em to add weight to scrap bin lol
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 68 guests