rear control arms.
Posted: Wed May 12, 2004 10:27 pm
how long are the control arms (eye to eye) on the rear of a GQ?
upper and lower?
thanks in advance
MaccA
upper and lower?
thanks in advance
MaccA
Page 1 of 1
Posted: Fri May 14, 2004 8:14 pm
so i guess thats a 'thanks for nothing' then?
Posted: Fri May 14, 2004 8:17 pm
bottom ones are 676mm
Posted: Sat May 22, 2004 8:44 pm
thanks mate. all i needed to hear 
the top ones are a bit shorter arent they?
the top ones are a bit shorter arent they?
Posted: Sat May 22, 2004 9:27 pm
alot shorter ...................although my new uppers are bout 867mm centre to centre
Posted: Sun May 23, 2004 10:41 am
stock upper trailing arms are 400 c to c
stock lower trailing arms are 676 c to c
diameter of tube length is 32 mm
bush hole is between 50 - 51 mm you would have to be exact with this.
i have 700 mm long bottom trailing arms for my 7"lifted ute.
top arms are stock length but if you had a wagon you would need stock length bottom arms and shorter [ have heard about 15mm shorter but i don't know for sure...anyone? ] top arms otherwise 35'tyres wont fit without cutting metal.
hope that helps
stock lower trailing arms are 676 c to c
diameter of tube length is 32 mm
bush hole is between 50 - 51 mm you would have to be exact with this.
i have 700 mm long bottom trailing arms for my 7"lifted ute.
top arms are stock length but if you had a wagon you would need stock length bottom arms and shorter [ have heard about 15mm shorter but i don't know for sure...anyone? ] top arms otherwise 35'tyres wont fit without cutting metal.
hope that helps
Posted: Tue May 25, 2004 8:34 pm
cool thanks.
was just getting ideas for converting my 45 to coils in the rear.
was surprised how good GQs flex in the rear. tho id run an A frame.
was just getting ideas for converting my 45 to coils in the rear.
was surprised how good GQs flex in the rear. tho id run an A frame.