Outer Limits 4x4 Board

Am looking at doing a 3 link in the back of my 94 single cab hilux ute, but I am having trouble finding any one who does this work.

I want it to be street rego'd, hence engineered and plated.

I may do it myself if the paperwork side is not to bad, but would prefer to just drive in and drive out.

Any help appreciated.

If we knew were you lived, you might get some sensible help. this place can be a little harsh...

shakes wrote:If we knew were you lived, you might get some sensible help. this place can be a little harsh...

It says it right there on the left... Aus

Yeah, good idea !

Looking for somewhere around the Brisbane / S E QLD region.

www.lukeys4x4.com or luke@lukeys4x4.com . we do coil kits for hilux`s
0409 991742

you will need to speek to pne of these guys

−
YOUNG Colin G
A Enkelman & Assoc.
Pty Ltd
1/5 Braeside Drive
BRAESIDE
VIC 3195
E: colin.young@enkelman.com.au
Page 10 Vehicle Standards Information No 15 Rev 11, Dec 04
Queensland
Work Category Name & Company Address Telephone/Fax/
Mobile number
Prof.
M/ship PC LV HV MC
P: (07) 5445 4755
F: (07) 5445 5753
M:
IE Aust
−
−
!
−
BARNETT Kenneth A
Ekebol Pty Ltd
14 Enterprise Road
KUNDA PARK
QLD 4556
E: ekebol@ekebol.com
P: (07) 3420 5848
F: (07) 3420 5848
M:
IE Aust
!
!
−
!
BELLARY Anant
Import Motorcycle Centre
80 Moss Street
SLACKS CREEK
QLD 4127
E: saralax@primus.com.au
P: (07) 3300 3564
F: (07) 3300 1691
M:
IE Aust
−
!
!
−
BLEAKLY Christopher J
Commercial Vehicle
Design Services Pty Ltd
40 Ridgeway Street
THE GAP
QLD 4061
E: kit@cvds.com.au
P: (07) 3277 1947
F: (07) 3277 1947
M: 015 023 056
IE Aust
!
!
−
!
BLYTHE Eric J
26 Nicholson Drive
SALISBURY
QLD 4107
E: eblythe@gil.com.au
P: (07) 3800 2852
F: (07) 3800 8636
M: 0410 302 332
SAE-A
!
!
!
−
EVANS Maxwell W
M W Evans &
Associates P/L
42 Lincoln Green Drive
FORESTDALE
QLD 4118
E: maxevans@gil.com.au
P: (07) 5525 3074
F: (07) 5525 3074
M: 0413 123 911
SAE-A
!
!
!
!
GRANT David C
Automotive Engineering
Consultant
3 Natan Road
MUDGEERABA
QLD 4213
E:
P: (07) 3255 1621
F: (07) 3255 1630
M: 0418 885 842
IE Aust
!
!
!
!
HARTWIG Bruce J
Sapid Pty Ltd
25 Raven Street
WEST END
QLD 4101
E: sapidpl@tpgi.com.au
P: (07) 3299 3044
F: (07) 3299 3044
M: 0419 558 033
IE Aust
SAE-A
!
!
!
!
JARZAB Henryk
Automech Design & Testing
Services Pty Ltd
11 Timms Court
UNDERWOOD
QLD 4119
E: automech@powerup.com.au
P: (07) 3344 1803
F: (07) 3805 7588
M: 0413 137 201
IE Aust
!
!
!
!
JOHNSON Bruce M
Bruce Johnson
Consulting Services
4 Colworth Street
SUNNYBANK HILLS
QLD 4109
E: bjcs@Flatrate.net.au
P: (07) 3425 1808
F: (07) 3425 1808
M:
IE Aust
!
!
!
!
LYE Anthony
Pleasantrees
Engineering Pty Ltd
Mt Brisbane Road
MT PLEASANT
QLD 4521
E:
P: (07) 3300 4700
F: (07) 3300 5655
M: 0411 426 110
IE Aust
!
!
!
!
MILLER Raymond
Ray Miller Pty Ltd
6 Cloghan Street
THE GAP
QLD 4061
E: miller@gil.com.au
P: (07) 3297 1940
F: (07) 3297 1940
M: 0400 571 940
IE Aust
!
!
!
!
SHINKARENKO Andrei V
Novocastrian Automotive
Engineering
147 Rosia Road
PARK RIDGE SOUTH
QLD 4125
E: andreishinkarenko@msn.com
Rev 11, Dec 04 Vehicle Standards Information No 15 Page 11
South Australia
Work Category Name & Company Address Telephone/Fax/
Mobile number
Prof.
M/ship PC LV HV MC
P: (08) 8273 3100
F: (08) 8273 3110
M: 0407 617 183
IE Aust

Spartacus wrote:you will need to speek to pne of these guys

−
YOUNG Colin G
A Enkelman & Assoc.
Pty Ltd
1/5 Braeside Drive
BRAESIDE
VIC 3195
E: colin.young@enkelman.com.au
Page 10 Vehicle Standards Information No 15 Rev 11, Dec 04
Queensland
Work Category Name & Company Address Telephone/Fax/
Mobile number
Prof.
M/ship PC LV HV MC
P: (07) 5445 4755
F: (07) 5445 5753
M:
IE Aust
−
−
!
−
BARNETT Kenneth A
Ekebol Pty Ltd
14 Enterprise Road
KUNDA PARK
QLD 4556
E: ekebol@ekebol.com
P: (07) 3420 5848
F: (07) 3420 5848
M:
IE Aust
!
!
−
!
BELLARY Anant
Import Motorcycle Centre
80 Moss Street
SLACKS CREEK
QLD 4127
E: saralax@primus.com.au
P: (07) 3300 3564
F: (07) 3300 1691
M:
IE Aust
−
!
!
−
BLEAKLY Christopher J
Commercial Vehicle
Design Services Pty Ltd
40 Ridgeway Street
THE GAP
QLD 4061
E: kit@cvds.com.au
P: (07) 3277 1947
F: (07) 3277 1947
M: 015 023 056
IE Aust
!
!
−
!
BLYTHE Eric J
26 Nicholson Drive
SALISBURY
QLD 4107
E: eblythe@gil.com.au
P: (07) 3800 2852
F: (07) 3800 8636
M: 0410 302 332
SAE-A
!
!
!
−
EVANS Maxwell W
M W Evans &
Associates P/L
42 Lincoln Green Drive
FORESTDALE
QLD 4118
E: maxevans@gil.com.au
P: (07) 5525 3074
F: (07) 5525 3074
M: 0413 123 911
SAE-A
!
!
!
!
GRANT David C
Automotive Engineering
Consultant
3 Natan Road
MUDGEERABA
QLD 4213
E:
P: (07) 3255 1621
F: (07) 3255 1630
M: 0418 885 842
IE Aust
!
!
!
!
HARTWIG Bruce J
Sapid Pty Ltd
25 Raven Street
WEST END
QLD 4101
E: sapidpl@tpgi.com.au
P: (07) 3299 3044
F: (07) 3299 3044
M: 0419 558 033
IE Aust
SAE-A
!
!
!
!
JARZAB Henryk
Automech Design & Testing
Services Pty Ltd
11 Timms Court
UNDERWOOD
QLD 4119
E: automech@powerup.com.au
P: (07) 3344 1803
F: (07) 3805 7588
M: 0413 137 201
IE Aust
!
!
!
!
JOHNSON Bruce M
Bruce Johnson
Consulting Services
4 Colworth Street
SUNNYBANK HILLS
QLD 4109
E: bjcs@Flatrate.net.au
P: (07) 3425 1808
F: (07) 3425 1808
M:
IE Aust
!
!
!
!
LYE Anthony
Pleasantrees
Engineering Pty Ltd
Mt Brisbane Road
MT PLEASANT
QLD 4521
E:
P: (07) 3300 4700
F: (07) 3300 5655
M: 0411 426 110
IE Aust
!
!
!
!
MILLER Raymond
Ray Miller Pty Ltd
6 Cloghan Street
THE GAP
QLD 4061
E: miller@gil.com.au
P: (07) 3297 1940
F: (07) 3297 1940
M: 0400 571 940
IE Aust
!
!
!
!
SHINKARENKO Andrei V
Novocastrian Automotive
Engineering
147 Rosia Road
PARK RIDGE SOUTH
QLD 4125
E: andreishinkarenko@msn.com
Rev 11, Dec 04 Vehicle Standards Information No 15 Page 11
South Australia
Work Category Name & Company Address Telephone/Fax/
Mobile number
Prof.
M/ship PC LV HV MC
P: (08) 8273 3100
F: (08) 8273 3110
M: 0407 617 183
IE Aust

That may be a list of Approved Officers (engineers), but they probably won't do the mods.

I am sure people like luke have an approved officer they use.

I HAD an approved officer I used in QLD, however he has closed down. For any suspension/axle mods that needed welding, he required a ticketed welder to do the work (or at least sign off that they had done the work).

i believe brewski built can get there coil conversions approved and have a guy who comes and mod plates stuff for them once work is finished.