Page 1 of 1
Clutch fan engaging or not
Posted: Thu Oct 01, 2009 9:31 pm
by 4wheelsdriven
I was just wanting somebody to tell me how i can test or see if my clutch fan is engaging. I have a holden 5lt in my cruiser and has just started to run a temp. I have flushed and cleaned radiator, new thermostat, and coolent. Could it be water pump if so again what is the best way to test that while im at it.
Posted: Thu Oct 01, 2009 9:33 pm
by rumpig89
to test the fan when its hot try stopping it with a thong etc. if it stops u need a new hub.
Posted: Thu Oct 01, 2009 9:41 pm
by 4wheelsdriven
A thong from the missus
or a thong from my foot lol.
Posted: Fri Oct 02, 2009 3:50 pm
by 351ciofgrunt
What makes you think you need to test it with the engine running? Don't be stupid.
With the engine OFF and cold grab the fan and see how much resistance there is to turn it, this is not the test but just to get a feel for it.
Now run the engine up to operating temp, turn it OFF and then see how hard it is to turn the fan, it should be quite hard to turn. if its only a little harder than cold then its farked.
Posted: Fri Oct 02, 2009 4:08 pm
by 4wheelsdriven
thanks 351 thats the go, sounds like ill keep all my fingers now.
Posted: Mon Oct 12, 2009 10:57 am
by me3@neuralfibre.com