Page 1 of 1

plumbing up snorkel

Posted: Mon Oct 05, 2009 6:37 pm
by GU-ish
hey all
changing my standard nissan snorkal to a stainless one.
wondering how people have plumbed it up once in the gaurd?

i dnt wish to use wat is already there from the standard one, as i have seen it before and didnt like it + i want a good join onto the airbox unlike the standard nissan one.

i assume flexi hose? and was wondering if anyone has used solid pipe in there with rubber joins?

thanks
chris.

Posted: Mon Oct 05, 2009 8:11 pm
by turbo gu
Silicon hose

Posted: Mon Oct 05, 2009 11:57 pm
by gq351
Image
Image
Image

Posted: Tue Oct 06, 2009 11:18 pm
by MarkR
Hi GQ351,

What are the inner & outer diameters of the pipe of your snorkel?

Posted: Wed Oct 07, 2009 12:57 pm
by gq351
MarkR wrote:Hi GQ351,

What are the inner & outer diameters of the pipe of your snorkel?
hey chris how are you mate?
all the stainless piping is 4'' inches in diamiter, & about 2mm thick..
good luck with it all!!!
cheers jess...

Posted: Wed Oct 07, 2009 1:14 pm
by MarkR
Thanks GQ351 - where did you find a snorkel head with a neck that fits a 4" tube? All I've been able to find so far are the massive heads for big rigs with 6"+ necks or the ones from Safari with the skinny 2.5" necks.

Posted: Wed Oct 07, 2009 4:01 pm
by garth
Donaldson make the 4" heads/rams. I am fabricating mine at the mo and the 304SS 4" pipe's wall thickness is 1.6mm. even thats $65.00 a meter!

Donaldson also do the water seperator valves for the airbox and all the elbows.

good luck

Posted: Thu Oct 08, 2009 8:38 pm
by gq351
MarkR wrote:Thanks GQ351 - where did you find a snorkel head with a neck that fits a 4" tube? All I've been able to find so far are the massive heads for big rigs with 6"+ necks or the ones from Safari with the skinny 2.5" necks.
no worries mate!! yeah i got mine from a place called coburg truck parts in vic, $45 bucks, maybe just try a truck joint in your area might have some luck hopefully?? :)

Posted: Fri Oct 09, 2009 12:27 am
by MarkR
Thanks. Have sent Coburg truck parts an email. I do have a Donaldson catalog, but all of their air ram snorkel heads that are listed have 6" or greater inlet diamters.

Posted: Fri Oct 09, 2009 7:42 am
by garth
Gudday

they do a 4" ....here's the info

Donaldson 4" Ram part number #H008154

regards

http://www.qds.com.au/downloads/PRODUCT ... inlets.pdf

Posted: Fri Oct 09, 2009 11:04 pm
by bilby
VN air intake pipe with the bends cut off will give you the straight sections ;)

Posted: Fri Oct 09, 2009 11:28 pm
by biggsy
Image
Image

Posted: Sat Oct 10, 2009 7:11 am
by 83-mud-lux
can someone tell me where you get those black silicone bends please?

looking at making a 4'' stainless snorkel for my 4b but cant find bends anywhere..

i can only find blue intercooler pipe but i want black instead of blue.

help would be appreciated thanks.

chees..smiley..

Posted: Sat Oct 10, 2009 10:25 am
by ledgend80
try truckline or a truck shop