Page 1 of 1
40 series window regulator removal/installation
Posted: Fri May 14, 2004 1:16 pm
by the_smoo
is there a quick and painless way to get these in/out?
Looks like you need arms of a newborn to get inside the door....
Posted: Fri May 14, 2004 2:56 pm
by darrenfj40
remove winder, remove panel from door.
If u wind the window right up. Then undo the 4 bolts around the winder followed by the 2 bolts towards the opening edge of the door. now u need to unbolt the mechanism from the bottom of the glass.
Push the winder into the door and slowly push the glass down until u see the bolts in the small holes in the door panel, undo bolts. winder should now fall of bottom of glass. lift out from bottom of door
Hope u can understand my explanation.
Posted: Fri May 14, 2004 6:05 pm
by the_smoo
ill give it a crack...........ta for the help...
Posted: Sat May 15, 2004 12:35 am
by pcman
just wondering if you saw the new window regulator on ebay for a 45 series last time i saw it it was at 20bux
Posted: Sat May 15, 2004 8:12 am
by the_smoo
thats exactly what i was looking at!!