Outer Limits 4x4 Board

I went and bought a K&N air filter to suit a GQ patrol pre cleaner airbox and the part no they sold me is E-3346

The filter fits but its a little too tall and the lid doesn't seal on the airbox.
It's also a thin air filter unlike the thick paper air filter that came out of the airbox

anybody ?

Surely somebody's got a K&N fitted in there GQ Patrol precleaner and would be a able to tell me the part no.


Pleasssssssse

There i asked nice

oozuk wrote:anybody ?

Surely somebody's got a K&N fitted in there GQ Patrol precleaner and would be a able to tell me the part no.


Pleasssssssse

There i asked nice

I might have one in the shed.. with cage, I'll look tomorrow, you can have it if you want it.

Awesome .... could you post up a pic of it so i can see if it's different or the same as the one i've got

Bogged check ya PM

oozuk wrote:Bogged check ya PM

yep.. its the one for behind the headlight

Hi mate, I had the same problem with a Uni Filter for the prefilter. It was maybe 2 to 4 mm taller than it should be? I got around it by goin to LCarke Rubber and buying some thin rubber and cutting an over size rubber ring x2 and using them like a large "o"ring seal. works a treat, the lid clamped down on them well and sealed up great.

Hope this helps. looking to put in a K&N myself

cheers mate

Look'n 4 Mud wrote:Hi mate, I had the same problem with a Uni Filter for the prefilter. It was maybe 2 to 4 mm taller than it should be? I got around it by goin to LCarke Rubber and buying some thin rubber and cutting an over size rubber ring x2 and using them like a large "o"ring seal. works a treat, the lid clamped down on them well and sealed up great.

Hope this helps. looking to put in a K&N myself

cheers mate

Cheers might look into that