Outer Limits 4x4 Board

Posted: **Sat Oct 10, 2009 2:34 pm**

Hey YALL

Just after some measurements of the Screen with Surround

Height / Width / Depth would be great ...

Just looking at options if a Lexan Screen gets rejected for TT2010.

Since I chopped and lowered the roof etc not a hope in hell of retro fitting a Vit Screen on there ...but if possible would prefer to keep it Zook

If anyone out there has one handy and can spare the time it would be good cheers!!

Dan

Posted: **Sat Oct 10, 2009 5:04 pm**

from outside seam edge -
bottom. width= 1150
top width =1342
center height =610
depth =44
jason.

Posted: **Sat Oct 10, 2009 7:46 pm**

mr green wrote:from outside seam edge -
bottom. width= 1150
top width =1342
center height =610
depth =44
jason.

Thanks Jason

Will go and check to see how it may sit on the current tube work

cheers

Dan

Posted: **Sat Oct 10, 2009 8:09 pm**

pretty sure its a 70 degree angle too.

Posted: **Mon Oct 12, 2009 2:28 pm**

I should have an old one rusted out with cracked glass in it Dan if you want someting to mock up.

Layto....

Posted: **Wed Oct 14, 2009 5:48 am**

Thanks Layto ,

It seems it wouldnt pass the new ruling ...well updated 80% original front ruling anyway ... Thanks for the Info anyway fellas ...back to the drawing board

cheers

Posted: **Wed Oct 14, 2009 11:05 am**

would a vit window fit if it was 20% lower??

Outer Limits 4x4 Board

Sierra Fold Down Screen Dimensions

Sierra Fold Down Screen Dimensions