Page 1 of 1
GEN 3 ... how do i identify..
Posted: Sun Oct 11, 2009 7:07 pm
by Mousie
hey i was jsut wondering if anyone knows how i can tell what series a gen 3 motor is by numbers on the block?
or by any other way?
cheers
Posted: Sun Oct 11, 2009 9:52 pm
by Matt_85Lux
Part numbers for various Gen 3 series engines are as follows:
LS1 (5.7L)- 25534322
LS6 (5.7L)- 12578104
12562190
LM7 (5.3L)- 12562201
LQ4 (6.0L)- 12575147
12575148
LQ9 (6.0L)- 12499467
The LS1 was in the Corvette, Camaro, Firebird, GTO and VTII - VZ commodores
LS6 was in the Corvette
LM7 was in '99 and later full size trucks
LQ4 was in GMC/Chevrolet full size trucks
LQ9 was in Escalade ans Silverado SS
LS1 and LS6 are alloy blocks while the LM7,LQ4 and LQ9 are Iron Blocks
Posted: Mon Oct 12, 2009 6:55 pm
by Kitika
Mine has a steel tab hanging off the side of the head gasket with 5.7 written on it so I guess all the other ones would have their CC written on it too.
Posted: Mon Oct 12, 2009 8:39 pm
by Mousie
thanks verry mutch for the info!
Posted: Mon Oct 12, 2009 8:56 pm
by VooDoo
ALL Holdens from VT to VY were LS1 (gen3) although from the VXII to late VYII they used the better LS6 manifold. THe VZ had both a LS1 5.7L and L76 6L. The VE used a L98 (basicly the L76 without the DOD hardware then added the DOD back again this year.
I have a LQ9 Iron block based 408 cube stroker with a 2.8L twin screw supercharger in a HSV GTO pushing arounf 870hp so you could say i know the engines well. I used to have a WH caprice running 11's on the drag strip (in street machine twice)
If you need any info on these engines PM me (inc cam choice, tuning, strokers or turbo kits etc) Im not a shop but ive pretty much done everything you can to them