setting 4 adj upper & lower control arms on SWB??

Post by **nedla** » Thu Oct 15, 2009 5:07 pm

I just bought adj upper & lower control arms from snake racing. very happy with them being so easy to fit and adj. bought them for the tailshaft vibrations, just wanna no if there is a specific setting for them?? I have 5" +2" lift..

Post by **SIM79** » Thu Oct 15, 2009 5:24 pm

http://www.outerlimits4x4.com/ftopic175 ... hlight=swb

Post by **waandy** » Thu Oct 15, 2009 6:17 pm

are you running double cardinal or stock shaft?

Post by **nedla** » Thu Oct 15, 2009 6:48 pm

just a stockie was thinking bout DC joint

Post by **waandy** » Thu Oct 15, 2009 6:54 pm

u will have some serious uni angle with stock shaft, and rotating the diff back to suit a dc will be a big turn, why is ur rig so high? what size tyres are you running? 7 inch is a huge lift in a swb

Post by **nedla** » Thu Oct 15, 2009 6:59 pm

it was the first thing i bought for the car. got it second hand off a mate bout two years ago. I run 31s for the road(i know thats half the problem) and 35 pedes

Post by **nedla** » Thu Oct 15, 2009 7:42 pm

ive already got gear box spacers in that made it a bit better but still pretty loud. shits me up the wall

Post by **waandy** » Thu Oct 15, 2009 8:41 pm

basically you have to point the pinion angle down so that the flanges are running parralal, id lengthen the lowers 16mm at first and see what it does, every set up is different so you will have to fine tune it

Post by **nedla** » Sat Oct 17, 2009 3:27 pm

thanks just did it yesterday i reset them then made them longer no more noises

thaks guys

Outer Limits 4x4 Board

setting 4 adj upper & lower control arms on SWB??

setting 4 adj upper & lower control arms on SWB??

Who is online