Outer Limits 4x4 Board

Posted: **Thu Oct 15, 2009 9:50 pm**

i want to no if any one has put a cj7 or a cj5 body on a wragler chassy any help would good.

Posted: **Sat Oct 17, 2009 10:56 pm**

Try the yank jeep forums

Posted: **Sun Oct 18, 2009 8:48 pm**

Not the tub that I am aware of - but I have seen the front clip swapped over.
Personally I think this makes more sence if possible as the TJ Tub offers a few benefits over the CJ (galvanising/better paint/wider rear wheelweels).

The basic dimensons of the tib are very very similar - although the chassis is a bit different in shape, I think it could work fairly easily. ... Biggest issue I can think of is "offically" the chassis is what determines the year model - so that means you'd need to comply with TJ ADR's (possibly).

Posted: **Mon Oct 19, 2009 11:21 pm**

Wooders wrote:Not the tub that I am aware of - but I have seen the front clip swapped over.
Personally I think this makes more sence if possible as the TJ Tub offers a few benefits over the CJ (galvanising/better paint/wider rear wheelweels).

The basic dimensons of the tib are very very similar - although the chassis is a bit different in shape, I think it could work fairly easily. ... Biggest issue I can think of is "offically" the chassis is what determines the year model - so that means you'd need to comply with TJ ADR's (possibly).

thanks im going to put a gen 3 ls1 into it. i want to do sum thing a bit difront from the pack.

Posted: **Tue Oct 20, 2009 7:26 am**

LOL I'm not sure I'd say fitting a chevy 350 into a Jeep is really being different from the pack......... Examples of things that are different are:
Buick 455, Cummins 6BT, Lexus, Powerstroke, Rotary heck even an AMC401 would be "different" but not a chevy .....
No offense to the chevy as it IS a good donk - just that I would not use the word different

Outer Limits 4x4 Board

has any body put a cj body on tj chassy

has any body put a cj body on tj chassy