Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

R32 seat into 106 Hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

R32 seat into 106 Hilux

Post by Lux_89 »

Hi,

Once again im at my hilux, scored some r32 skyline seats for it.. Ino the basics of fitting them, i just wanna know if anyones done it b4? havn got em yet so just wanna know easy hard or dont bother...

Cheers, Weavle
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 116
Joined: Mon Aug 24, 2009 9:27 am
Location: Adelaide

Post by MR 1JZ »

also interested in this as I want to put R32 GTR seats in my bundy
GZ20 Soarer - 2JZ and T78
RJ70 Bundera - Sold
SJ Sierra - 31" MT117, 2.5" Springs, Shackles, Dual Lockrites, 2" BL and much more
Top
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

get the seats n bring em over, iv seen em in 2wd luxs b4 so i doubt they are to hard to put in
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Top
Posts: 750
Joined: Mon Aug 25, 2008 12:06 am
Location: gold coast

Post by johnsy86 »

its not that difficult 3 out of the 4 bolt holes line up sweet on drivers side and 2 out of the 4 line up on passengers side and a nut and bolt is needed for the 3rd, they sit a lil lower than standard lux seats but u can wind the lumber support right up to sit even with lux seats, so if ur not to worried bout only having 3bolts hold the seat in on each side instead of 4 there a great seat to fit real supportive and u can pick them up reasonably cheap.
Lj80 tuff truck "mr Grumpy"
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

Thanks guys... rory,pretty sure illbe over sooner or later to partake in drinkingpiss/workingoncar hahaa...

Hope this helps others...

Maybe wack it in the STICKY thread once ive got photo's...?
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 255
Joined: Thu Mar 15, 2007 8:24 pm
Location: PENRIFF

saets

Post by SHANE055 »

On mine the front mounts lined up perfectly just had to drill the holes out a little bigger
the rear outer mounts i just welded a bit of flat plate to them and ad to drill the hole back a little further and the ones against the transmission tunnel took a little fab work but i'm really happy with the seats there BS comfortable and keep you locked in nice and tight when wheeling.
Coil SASed 03 LUX 3.0TD
91 TD 80 series wagon
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

Are you trying to do it Legally or not?
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests