Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dyno

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 119
Joined: Mon Jan 21, 2008 6:36 pm
Location: Perth

dyno

Post by smash250 »

Well its been a while since my last update, but i finally took the GU over the DYNO today. I have got a few issues to iron out yet but im pretty happy with the result i left with. The Dyno figures were 178Kw + 543Nm @ 2986rpm. This was diesel only as i have a Diesel Gas system on it as well but have not turned it on yet as its not 100% finished but should be close to 200KW with the gas system on. This car is going to be my daily driver so although could have got more torque out of the motor, left it @543 because they start to blow too much diesel smoke.

Cheers Ash
Posts: 17
Joined: Mon Jan 26, 2009 10:03 am
Location: Townsville, QLD

Post by J0RDY »

So is this a stock 4.2 Intercooled turbo diesel?
Posts: 119
Joined: Mon Jan 21, 2008 6:36 pm
Location: Perth

Post by smash250 »

dam-it i hit the wrong button was meant to hit reply and i hit new topic.

No this is not a standard td42.

iv already got a thred
http://www.outerlimits4x4.com/sutra1754934.php#1754934
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

so did you end up going with the gt3071r i see on your otherr thread you said thats what you were going to use. what boost did you end up running and when did this setup start making boost from and when does it make full boost by.
Posts: 119
Joined: Mon Jan 21, 2008 6:36 pm
Location: Perth

Post by smash250 »

its running 22.5PSI and yes i did use the GT3071R comes in a little later then a 28 but still holds boost no problems could easly add more boost but from what iv been told it dosnt do much, boosting over 20PSI
Posts: 305
Joined: Mon Apr 21, 2008 8:53 am
Location: New Zealand

Post by garth »

Hey Fellas

it will boost well over 20, I'm using the same turbo and It 'streaks' to 30 psi, after that the boost gauge runs off the clock.

My waste gate is set to open at that pressure but I'm told it'll still go higher...the engines are good for it as there are guys on here pushin 40psi.....

If you have a search there's some interesting info about the Pro's and cons of high boost in regards to Turbo efficiency bands, high charge air temps, intercooler efficiency, etc etc

Great to hear someone else used this turbo, as its dosent seem to be a popular choice...correct me if I'm wrong?

regards
GQ with 30 PSI of TD42T.........
Posts: 158
Joined: Sun Apr 26, 2009 2:52 pm
Location: Nowra

Post by drifter** * »

i've put one on a 1hz, but haven't had much luck so far getting it to perform. hoping after some modifying we can get some better results.
98 GU Ti 4.5 Auto Turbo LiLPG
O2 Auto Sports
1/25 Norfolk Ave
South Nowra NSW
o2autosports@bigpond.com
0244230977 0414873727
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

drifter what have you found it to be too laggy or not enough fuel and so on
Posts: 158
Joined: Sun Apr 26, 2009 2:52 pm
Location: Nowra

Post by drifter** * »

it probably needs more fuel, but it needs some other things before we turn it up.
98 GU Ti 4.5 Auto Turbo LiLPG
O2 Auto Sports
1/25 Norfolk Ave
South Nowra NSW
o2autosports@bigpond.com
0244230977 0414873727
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest