Page 1 of 1
Transfer Handbrake removal ?
Posted: Tue Oct 20, 2009 8:08 pm
by mrRocky
I have a 84 1ltr transfer with handbrake on the rear and was wondering if i can just remove the handbrake attatchment and run it as normal or
am i stuck with it.
cheers mick.
Posted: Tue Oct 20, 2009 8:10 pm
by nicbeer
Nopes.
u can remove easily.
take flange nut off and then drum and then unbolt the drum assuembly.
after of course u will have to put the flange and nut back on. U may need a new/difference flange..
Posted: Tue Oct 20, 2009 8:26 pm
by mrRocky
Posted: Tue Oct 20, 2009 8:54 pm
by kreecha
Why did you take it off?
Posted: Tue Oct 20, 2009 9:09 pm
by mrRocky
I have a toyota 4runner coil rear in mine and plan on using a hilux rear shaft which will fit perfect with handbrake assembly removed, just needed to know if it was possible. I can buy an adapter flange for sierra
t-case to lux t-shaft so im set.
Posted: Tue Oct 20, 2009 9:20 pm
by kreecha
Funny that I just received my Suzuki case to Toyota driveshaft flange today.
But are you telling me the flange wont work with the drum park brake?
Posted: Tue Oct 20, 2009 11:17 pm
by mrRocky
Not at all, i'am running a lux tailshaft and need it gone so it fits lengthwise or i'll have to have it shortened, i do not know if it will work on the h-brake flange.