Page 1 of 1
Aqualu Aluminum RHD Dimension Help!
Posted: Wed Oct 21, 2009 6:47 am
by Big-D
We are looking for anyone who can help us confirm the dimensions for a RHD cowl for the Land Cruiser FJ40 series. We have had many requests for a RHD system and we are ready to put them into production, as we have a few orders pending. We want to confirm that the fuel filler is on the right hand side and the dimensions on the image attached are correct. If anyone has any information to contribute, we would greatly appreciate it.
Thanks,
Aqualu
www.aqualu.com
info@aqualu.com
Please click on link below to view image of dimensions we require.
http://www.facebook.com/photo.php?pid=2 ... 4112597339
mmm
Posted: Wed Oct 21, 2009 7:38 am
by SteelArt
I can check it tonight for you.
Can you confirm that you want distance to centre ? If so it will be pretty hard to get an accurate measuremnet with steering column and Master Cylinder fitted. Would be easier to get you an OD measuremnet to the edge or one of the mounting holes.
Re: mmm
Posted: Wed Oct 21, 2009 8:09 am
by Big-D
SteelArt wrote:I can check it tonight for you.
Can you confirm that you want distance to centre ? If so it will be pretty hard to get an accurate measuremnet with steering column and Master Cylinder fitted. Would be easier to get you an OD measuremnet to the edge or one of the mounting holes.
Thank you!
Yes. It would be best to get the distance to center, but I understand if you are only able to get the outside dimensions.
Also please let me know what year your cowl is.
Thanks again for all your help we really appreciate it,
Aqualu
www.aqualu.com
info@aqualu.com
Posted: Wed Oct 21, 2009 8:26 am
by bubs
I dont have a 40 series to measure for you, but your shit is bad ass, that's all
Posted: Wed Oct 21, 2009 8:43 pm
by hj 45
Fuel filler is on the RHS, our driver's side. Love that 4 door body for the 45 series chassis.
Posted: Sat Oct 24, 2009 8:18 am
by bj on roids
It should be the same as on the other side right?
Posted: Sun Oct 25, 2009 4:26 am
by Hamo
like to know the price shipped to aus
Posted: Tue Oct 27, 2009 8:38 am
by Big-D
Hey Guys - Any luck with the measurements?
We have wanted to get our products over to Australia for quite some time now, hopefully with the addition of this new RHD aluminum cowl we can make this happen. We have recently been exploring the possibilities of filling a container. We would accept pre-sale orders and once we had enough to fill a container we would ship it over. When we are ready to start this process and begin accepting orders, we will post more information online (forums) as well as our web site
www.aqualu.com
At this time, shipping for a complete Land Cruiser Tub & Cowl is approx. $1150 USD + customs clearance/ VAT's for ocean export to Melbourne.
We thank you all for your comments and continued support and look forward to getting this RHD cowl over to Australia soon.
Aqualu Industries Inc.
www.aqualu.com
Feel free to e-mail us directly (
info@aqualu.com) with any questions you may have.