Page 1 of 1
Educate me on GQ centres?
Posted: Thu Oct 22, 2009 9:42 pm
by ethann
Just wondering what the main difference is between front and rear beside the lsd in the rear of corse.
Could I use the front pinion on the rear?
I've chipped a few teeth on the pinion on the rear and I have a spare front centre, Hence the question.
Thanks.
Posted: Fri Oct 23, 2009 12:52 am
by Mario
No. Front is 31 splines aand rear is 33. Plus front is hi pinion (reverse rotation) and rear is low pinion.
Posted: Fri Oct 23, 2009 8:22 am
by ethann
Mario wrote:No. Front is 31 splines aand rear is 33. Plus front is hi pinion (reverse rotation) and rear is low pinion.
Cheers Mario. =)
Re: Educate me on GQ centres?
Posted: Fri Oct 23, 2009 9:33 am
by jessie928
ethann wrote:Just wondering what the main difference is between front and rear beside the lsd in the rear of corse.
Could I use the front pinion on the rear?
I've chipped a few teeth on the pinion on the rear and I have a spare front centre, Hence the question.
Thanks.
if you use the front centre in the rear and swap bolt your locker from the rear into the front centre you have instant rear hi-pinion. it will work this way only.
JEs
gq centres
Posted: Fri Oct 23, 2009 1:29 pm
by 265grunter
while we are on this subject will a 2006 lsd core[ rear] fit into a gq front centre.