Outer Limits 4x4 Board

hey fellas. i just had my engine mounts done but didnt do the gearbox mounts at the same time(like i should) and now my clutch pedal feels loose and fairly soft and there is a little tic tic noise like something rubbing agains something and a bit of a vibration. now could anything of been bent or broken or moved while jacking up the engine?? it still changes gears eaisly enough and i dont think its the gearbox so what are your suggestions??

Thanks fellas

anyone???? any help is awesome

Check the sump for damage/bending at the front if its TD42 as there is sweet FA clearance between the crank and the sump up there. If it is touching you will get the symptoms you discribed. Just get a rubber mallet and hit the side of the sump on the angle parts to pop it back out again. Or take it off and knock it out again.