Page 1 of 1
GU 2.8td Exhaust?
Posted: Wed Oct 28, 2009 9:51 am
by geek
I was just wondering if anyone could tell me if it would be worthwhile putting a larger exhaust system on a standard 98 GU 2.8 td?
Re: GU 2.8td Exhaust?
Posted: Wed Oct 28, 2009 10:28 am
by bogged
geek wrote:I was just wondering if anyone could tell me if it would be worthwhile putting a larger exhaust system on a standard 98 GU 2.8 td?
it wont hurt. but what do you want from it? If its awesome hp increase, you will be disappointed.
http://www.patrol4x4.com/forum/
Posted: Wed Oct 28, 2009 3:37 pm
by geek
I was just interested if there would any performance gain at all.
Posted: Wed Oct 28, 2009 3:54 pm
by 8maddog8
geek wrote:I was just interested if there would any performance gain at all.
Yes, you will get a performance gain. The most comes from a bigger dump pipe. But if you get a whole system you will hopefully see some improved low down torque and power.
Posted: Wed Oct 28, 2009 8:24 pm
by tuflox
mines got a 2.5 inch and rapid power module,goes real well,very suprising,
Posted: Wed Oct 28, 2009 8:42 pm
by bogged
geek wrote:I was just interested if there would any performance gain at all.
it will depend on expectation..
For $700-1000 for a good mandral bend exhaust you may be happy you may not. Depends on if you want 2kw more, or 15... it wont be the second one.
Specially if theres nothin wrong with your current exhaust.
might be an idea to try and find someone with one done without chips and crap so you can see for yourself before investing.