Page 1 of 1
Body Lift 2dr & 4dr
Posted: Tue May 18, 2004 3:52 pm
by GRIMACE
Hey guys/girls
Is there any differences in the kits for the two door or four door rangies ? ? ?
Reason bein is I might get that 2" body lift off jeremy but not sure if i can use the 2dr body lift on mine
Cheers
Anthony
Posted: Tue May 18, 2004 4:13 pm
by HSV Rangie
Seat belt mounts are the only thing i can think of, they wont be in the kit.
The spacers I believe are the same.
Michael.
Posted: Wed May 19, 2004 9:18 am
by GRIMACE
thanks
is there an easy way to whip up seatbelt mounts
Posted: Wed May 19, 2004 9:49 am
by HSV Rangie
Extend seat belt mounts:
2 options:
A: cut existint bolt and extend with tube. (not the best)
B: use 25mmx3mm flat drill 2 holes into at 50mm centres, need another bolt as well, remove seat belt T bolt fit new extensions and refit.
Michael.
Posted: Wed May 19, 2004 11:19 am
by GRIMACE
HSV Rangie wrote:Extend seat belt mounts:
2 options:
A: cut existint bolt and extend with tube. (not the best)
B: use 25mmx3mm flat drill 2 holes into at 50mm centres, need another bolt as well, remove seat belt T bolt fit new extensions and refit.
Michael.
Thanks Micheal
If its as simple as that cant I just go buy a longer bolt
Posted: Wed May 19, 2004 11:54 am
by HSV Rangie
Nope its a TEE bolt climb under car and you will see what I meen.
Michael.
Posted: Wed May 19, 2004 2:49 pm
by Aquarangie
When I fitted my 1 inch body lift, I had my rear seat bely bolts made up an inch longer.
Not the cheapest option. Micheals way is by far the easiest and best. I didn't know this when I did my body lift about 3 years ago and would have done it this way.
Good luck,
Trav