Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Best option for 2f engine

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 56
Joined: Mon Nov 26, 2007 12:55 pm
Location: Brisbane, Australia

Best option for 2f engine

Post by Midnight Middy »

Hey everyone,
I am buying an fj40 and it has a 2f with a 350 holly, it runs ok but wont idle below 1000 when its cold. Think its just a blocked jet. But i cant afford to run it on petrol so my options are:
1: Keep the engine, buy a second hand gas kit for a fj40 for $130 bucks get the tank tested and have my mechanic install it. Get the $1750 rebate and have some extra cash in my pocket to freshen up the engine
or
2: There is a fully rebuilt 2f engine with performance parts like flat top pistons, bored .30, headers, stage 2 cam, rebuilt to run on lpg with only 15000kms since rebuild with all receipts. It comes with gas kit and gas tank but from a 60 series. I know the tank wont fit so il have to buy a new one. The engine is $1750+tank+labor-rebate.

Which is the better option?
Thanks so much for your input.
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

What is the rebuilt 2f built for? Doing burnouts or low down torque? And then what do you need it for? If it is built suitably for what you want to do, maybe that is a goer.

Sorry can't help too much, I prefer diesels.
Posts: 56
Joined: Mon Nov 26, 2007 12:55 pm
Location: Brisbane, Australia

Post by Midnight Middy »

Well i dont think that a diesel swap will work out any cheaper with more hp or torque.
The guy had the engine built for his fj60 that had 37" muddies that he used as a weekend basher.
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

if the 2fs running in your 40 all ready your best off getting it serviced and then getting a gas conversion,eg new system,buying second hand seems enticing,but end of the day u dont know what your getting,also a 60s set up will be different with length of gas lines ect,end of the day is it will still need fitting,if u plan on keeping it for a while,save stuffin round,shop around for decent priced new conversions and u end up with the rebate back and its all new and legit
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

Midnight Middy wrote:Well i dont think that a diesel swap will work out any cheaper with more hp or torque.
The guy had the engine built for his fj60 that had 37" muddies that he used as a weekend basher.
Sorry mate, wasn't saying you should do a diesel swap, I just know a bit more about them.

The rebuilt motor sounds good, but I also agree with richardsc. More research on gas systems may be the go to see how difficult it would be to swap in the second hand system.

I think a bit more invesitgation into your current engine would be the go. See what it needs to get running good and get a bit more grunt. If it's pretty simple and cheap, keep it and then go for the right gas system, whether its second hand or not.
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

those cabs are snot for offroad and hills/ sand dunes for flooding
i know you can get kits but there sh1t aswell
i had a race camed 3f with shaved head double valave springs yadya on gas went really well i found the cam made it hold the gears better in sand/off road
2f's have a longer stroke so more torque when worked over than 3f
not sure about 2f's but from mem im thinking the 3fs have flat tops std so head shaving give you more compression
and gas loves compression and dosnt flood offroad
Post Reply

Who is online

Users browsing this forum: No registered users and 56 guests