Page 1 of 1

turbo info

Posted: Tue Nov 03, 2009 11:03 pm
by jamie noble
hi i am new to the Nissan side of 4wds after coming from the suzuki side.

before suggesting searching, my search feature is not working what soever! no matter what i type in it says there is no results.
so after trying extensive page viewing, i was hoping that someone could help me by posting up previous thread links about common turbo kits ie the garret kit from turbo glide, the denco kit, the dts kit etc etc and what peoples opinions have been? i am not looking for any stupid power but from seeing other peoples posts maybe run about 10 psi just to give the thing a little more kick..

any info bar telling me to search would be much appreciated

a

Posted: Wed Nov 04, 2009 12:20 am
by ashbilt
hey mate firstly what do you have? if your running a td42, i noticed your in perth go see matt at united injection or at least give him a call.

Posted: Wed Nov 04, 2009 8:57 pm
by jamie noble
cheers

Posted: Wed Nov 04, 2009 9:48 pm
by ethann
I'm running a Turbo Glide system, around 10psi. Goes pretty good I reckon.

Posted: Thu Nov 05, 2009 8:38 am
by coxy321
I'm currently running a Mothfukle TD42 Performance kit (P/N: MFE-NTD42-S1) : MTQ lowmount, VG30DET turbo, custom MFE 3" dump into a full 3" mandrel bent MTQ exhaust straight through. I'm also using an MFE modified ZD30 airbox and custom 3" intake piping.

Did you try using Googles Advance Search?

http://www.google.com.au/advanced_search?hl=en

Or there is also the Google add-on at the bottom of the OL search page too.

Posted: Thu Nov 05, 2009 8:43 am
by Reddo
coxy321 wrote:I'm currently running a Mothfukle Performance kit: MTQ lowmount, VG30DET turbo, custom MFE 3" dump into a full 3" mandrel bent MTQ exhaust straight through. I'm also using an MFE modified ZD30 airbox and custom 3" intake piping.

Did you try using Googles Advance Search?

http://www.google.com.au/advanced_search?hl=en

Or there is also the Google add-on at the bottom of the OL search page too.
ahh thats the kit surplied by Barnsey off the forum. I heard he does cheap deal to forum members. Might be worth a PM.

Posted: Thu Nov 05, 2009 8:08 pm
by 300WinMag
I have a Dynamics kit, that use's a Misubishi TD05H16G small turbo, which I have modified to a 20g compressor and larger turbine wheel, I have also high flowed it, currently running 22PSI, 170RWHP. In stock trim the turbo was producing 150RWHP, spooled up fast down low but ran out of top end. Also using a gated boost controller.