Page 1 of 1
Gq airlocker back to front???
Posted: Thu Nov 05, 2009 7:31 pm
by michael a
ok does any one know if the air locker in my back center will fit my front center?
thanks guys
Posted: Thu Nov 05, 2009 7:46 pm
by create
no - different diff centres
Posted: Thu Nov 05, 2009 7:52 pm
by michael a
damb it
does any one want to swap???????
Posted: Fri Nov 06, 2009 5:55 pm
by rumpig89
swap an open for it
Posted: Fri Nov 06, 2009 8:29 pm
by money_killer
if its a coil sprung gq yes the air locker will go in the front not the air locker with centre
Posted: Sat Nov 07, 2009 1:13 pm
by nastytroll
money_killer wrote:if its a coil sprung gq yes the air locker will go in the front not the air locker with centre
Only if you don't want axles in it. Rear 33 spline, front 31 spline.
Posted: Sun Nov 08, 2009 11:59 am
by A.J.
you are right nastytroll.
By the way the third member can be used front to back, just done it on a GQ to create a high pinion rear. Works a treat! Just gotta use a rear LSD/LOCKER whatever in it for the splines to match.
We obviously had to use the front gears and ron them in reverse but no dramas with that at all.
Posted: Sun Nov 08, 2009 1:57 pm
by nastytroll
check with arb but you can proberly change the spider gears out for the other spline count.
Posted: Sun Nov 08, 2009 4:47 pm
by Mario