Outer Limits 4x4 Board

Anyone have pics of GQ ARB bullbar mounting brackets??

please thankyou.

Could get one for you soon as i'm about to pull mine off and make a tube bar.

Basically it's approximately 125x80x5or6mm channel which wraps around chassis rail. There's then a plate inside chassis rail with threads to match chassis rail mounting holes.

Something like that anyway

yeah just have to make up the inside section with the nuts welded on. fella from arb is probly going to fax me some info too.

lewie wrote:yeah just have to make up the inside section with the nuts welded on. fella from arb is probly going to fax me some info too.

I think I have an spare set floating about somewhere, and i'll be in Brisbane next week aswell. PM me if interested.

sorry for hijak, but is this the same way most winch bars are fitted? I'm making up a tube bar and want a strong mount to chassis, was gunna do the similar as arb. Any better ideas out there?

cheers
Bear

ok lewie,

passenger's side has a u-bracket that fits snugly inside chassis rail and has nuts welded to it to pick up 2 side bolts and 1 underside bolt. Also has 1 bolt under body mount as a locator.

driver's side uses an angle bracket which just picks up underside bolt and locator bolt under body mount. The other 2 side bolts fix to a OE bracket inside chassis rail.

Then as mentioned bullbar has a channel which slips over chassis rail. Locator bolts are also placed to pick up tie down points under body mounts.

Hope this helps
Bear

yeah i got sent some stuff from arb but only shows front angle with the U bracket on one side and the L bracket on other. might try and make something up see how motivated i get hmm.

thanks guys