Page 1 of 1

Help , how do I remove the factory radio from a 1990 Pajero

Posted: Thu Nov 12, 2009 8:10 pm
by wayneobro
Hey all , I have been through and though this site to find out if anyone knew how to remove the factory sterio from a 1990 paj . Ihave tried just about everything apart from smashing the heck out of it , I have a 1992 and the front just slips stright off n thought maby my wifes might be the same but it appers not :( , any help would be a bonus cheers y'all

radio removal

Posted: Sun Nov 15, 2009 12:07 am
by blettres1
hi mate i have 93 paj and if it is the same as mine the trim around it has to be removed there are 2 screws holding the trim in at the top take them out and then the top should come away from the dash the bottom is held in by 2 spring clips you should be able to just pull it off by hand. the radio is screwed to a bracket in the dash by 4 screws you will see this once the trim is removed. another thing to know my mate had an 89 paj we fitted a new radio all was good till he turned the lights on and the fuse blew this is because the factory earth is not man enough for modern radio so i ran a new one to one of the 4 screws that holds it in the dash. feel free to e mail me a pic if this dont work and i might be able to work it out.

Good luck mate

from ben blettres@hotmail.com

Posted: Sun Nov 15, 2009 9:44 pm
by wayneobro
Hey bro , yeah my 92 was the same as your 94 ,my wifes is like the last if the last of the gen 1 , wiering it up is not an issue it's getting it out that in stu ck on :( if needed I can post some pics to help ?

Posted: Mon Nov 16, 2009 6:09 am
by blettres1
yes send me some pics to my e mail blettres@hotmail.com and i will have a look